STEEL IT Epoxy Finish 4907 is a two-pack polyamide epoxy product utilizing a unique, tiny flakes of pure 316L stainless steel leafing pigment.
When applied over STEEL IT Epoxy Primer 4210, STEEL IT Epoxy Finish 4907 provides a very hard metallic barrier film. This non-toxic surface features a high resistance against chemicals, immersion in water, abrasion, high pressure washing processes, oils, alkalis, food acids, and UV radiation.
STEEL IT Epoxy Finish 4907 designed primarily to protect ferrous metals, may be applied directly to non-metallics such as wood, tile, glass, masonry, porcelain, plaster, fibreglass, masonite and many other non-porous surfaces.
This product is USDA approved.
STEEL IT Epoxy Primer 4210 is a two-pack, lead free, polyamide epoxy coating utilizing a unique 316L stainless steel leafing pigment.
STEEL IT Epoxy Finish (Article no. 4907) with Stainless Steel 316L is applied with a spray gun, brush or roller. Two-pack products (A + B). Mixing ratio 1:1.
STEEL IT Epoxy Primer (Article-no. 4210) with Stainless steel 316L is applied with a spray gun, brush or roller. Two-pack products (A + B). Mixing ratio 1:1.
STEEL IT Thinner, single pack product (Article no. 6811). Thin only if necessary using STEEL IT 6811 Epoxy Reducer. Thinning: up to 15% max.
Do not use any other solvents or thinners.
Coating and protection of surfaces made of steel and other materials against impact and abrasion, mild and strong alkalis, solvents and chemical spillage, and moisture. Note: Both the primer and the finish afford optimal physical properties that improve adhesion and help the system withstand flexing and stretching.